Name: PatioLux™ Cushion Covers
Brand: PatioLux
SKU: PL-CC-TT-4
Price: 24.99 USD
Availability: InStock

SET IT FROM THE FRONT ✦ NO WELDER NEEDED ✦ YOUR DRILL DOES THE PULL ✦ FREE US SHIPPING ✦ THREADSET™ M3

Stripped hole? New threads in seconds

Hardened tip. Brass threads that bite.

Up close: the tip that sets the thread

Ready for the next stripped hole

Thread It On In Seconds

Spin a brass M3 rivet nut onto the threaded tip until it stops — finger tight is all it needs. ThreadSet™ chucks into any cordless drill by its slim silver hex shank, just like a regular bit.

No special rivet gun, no air hose, no extra tools to buy. Keep a few nuts in your pocket and you're ready for the next hole.

Push It In. Pull The Trigger.

Drill a clean hole, push the nut in until the flange sits flat against the metal, and pull the trigger. ThreadSet™ pulls the nut tight behind the metal in seconds.

No wrench, no squeezing a hand tool forty times, and no reaching behind the panel. Everything happens from the front — even when the back is sealed shut.

Clean, Flush, Factory-Strong Threads

All that's left is a flat brass flange and a solid M3 thread that holds in thin metal where a screw would strip out. Bolt on lights, brackets, clips and covers — then take them off and put them back as often as the job needs.

It's the fix for trailer walls, truck beds, fender liners, enclosures and any spot where a screw alone won't hold.

Straight From The Job Site

★★★★★

Trailer light back on in 10 minutes

Stripped M3 hole on the fender. Drilled it out, set a rivet nut with my cordless drill and bolted the light back on. Done before my coffee got cold.

Ray T.

★★★★★

No back access, no problem

Enclosure panel with zero room behind it. Set the nut from the front, the flange sits flush and the bolt threads in like it came from the factory.

Dana K.

★★★★★

My drill does the work now

Press it straight in and pull the trigger — the drill pulls the nut tight. Way easier than squeezing a hand tool forty times on one job.

Luis M.

★★★★★

Cheaper than a shop call-out

Truck bed rail needed new mounting points. $9.99 and the drill I already own beat paying a shop. Threads in and out clean every time.

Kevin P.

★★★★★

Fender liner fixed for good

Plastic clips kept popping out of my inner fender. Drilled out the holes, set M3 nuts and bolted it up. Hasn't moved since.

Marcus J.

★★★★★

Clean threads in my control boxes

I build small steel enclosures. Flush brass threads look clean and hold every screw I throw at them.

Erin S.

★★★★★

Saved a stripped mount

Stripped the thread on a bracket mount. Opened the hole up, set a nut and now it's stronger than the original.

Jake W.

★★★★★

Easy on my first try

Never set a rivet nut before. Watched the video once and set six nuts in my truck cap that same afternoon.

Carlos R.

Why ThreadSet™ Beats The Old Fix

Thin metal won't hold a screw for long, and a welder is overkill for one bracket. Here's how the three fixes stack up.

	ThreadSet™	Self-tapping screws	Welding a nut
Holds in thin metal
Bolt comes out and goes back in
No welder, no sparks
Done from the front
Uses the drill you own
Flush brass finish

Frequently Asked Questions

check_box

What does ThreadSet™ do?

It turns your cordless drill into a rivet-nut setter. You get strong M3 threads in thin sheet metal — no welding, no tapping, no access to the back side.

check_box

Do I need access to the back of the panel?

No. Push the nut into the hole and set it from the front. It clamps behind the metal on its own.

check_box

What drill do I need?

Any cordless drill or impact driver. The chuck grips the slim silver 1/4" hex shank — press the nut into the hole and the drill does the pull. No wrench needed.

check_box

Is it M3 only?

Yes. ThreadSet™ is built for M3 rivet nuts and comes with the M3 setting adapter plus M3 rivet nuts.

check_box

How long does shipping take?

Shipping is free on every US order, and orders leave our warehouse in 1–2 business days. During the holiday season delivery can take 3–4 weeks, and tracking can go quiet for a few days while your parcel changes carriers — it's still moving. Check it anytime on our Track Your Order page.

check_box

What if my kit arrives damaged?

Email support@waylandtool.com or call (307) 317-0205 with photos within 7 days of delivery and we'll replace it or refund you. Used kits and set rivet nuts can't be returned.

FREE US SHIPPING ✦ SHIPS IN 1–2 BUSINESS DAYS ✦ HOLIDAY DELIVERY 3–4 WEEKS ✦ M3 ONLY ✦ THREADSET™

Your cart is empty

Cart • 0 items

PatioLux™ Cushion Covers